UCAN Flo-Rok
SKU: U1FR528MAX
UCAN FLO-ROK FR5 MAX is a styrene free epoxy acrylate anchoring adhesive suitable for year-round use without preconditioning in temperature ranging from -20C to over 30C. This versatile two component, high strength anchoring adhesive, provides stress free fastening and is an excellent choice for anchoring & dowelling. A matching static mixing nozzle, as well as FLO-ROK’s low mix ratio sensitivity, ensures thorough, 10:1 mixing of the resin and the hardener.
UCAN FLO-ROKTM FR5 MAX anchoring adhesive is specifically formulated for continuously threaded steel rod and deformed steel reinforcing bar anchoring to resist static, wind or earthquake (Seismic Design Categories A through F) tension and shear loads in cracked and un-cracked, normal-weight concrete having a specified compressive strength, f ‘c , of 2,500 psi to 8,500 psi (17.2 Mpa to 58.6 Mpa).
The FLO-ROKTM FR5 MAX adhesive anchors are designed to be used for floor (vertically down), wall (horizontal) anchoring applications.
TYPICAL APPLICATIONS:
- Rebar dowelling
- Highway and bridge construction
- Machine, crane and hoist installation
- Hollow wall anchoring applications
- Renovations
FEATURES:
- IAPMO – ES listing pending
- ACI 318 Category 1 anchor (continous spec. inspection) for cracked & uncracked concrete
- Tested in accordance to AC 308 for long term sustained load at standard and elevated temperature
- Seismic resistance
- User friendly, low odour, styrene free & MMA free
- Meets LEED guidelines; low VOC
- Moisture insensitive, non sag formula
- Suitable for damp and water filled holes
- Shelf life 1 year, store cartridge at +5C to +25C before use
- Meets CSA A23.3-14, Annex D requirements
- Size – 10oz
- Unit weight – 1.16lbs
APPROVALS:
- MTO M1 120
- 2015, 2012, 2009, 2003, International Building Code
- Credit 4.1 – Low Emitting Materials
You must be logged in to post a review.
Reviews
There are no reviews yet.