MC Bauchemie MC-AnchorSolid E820
The MC-AnchorSolid E820 is a ready to use 2-component epoxy-based anchor adhesive that is suitable for dry and wet non-cracked concrete, and applicable with threaded rods and rebars. Used for anchoring work for static and quasi-steady loads in horizontal, vertical and overhead areas as well as anchoring for dry and permanent wet interior and exterior components, with and without especially aggressive conditions. It is thixotropic and stable for vertical and overhead application with high compressive and tensile strength. Can also be used for anchoring of threaded rods and rebars for fixings of attachments examples being consoles, railings, storage racks, awnings, scaffolding, suspended ceiling, building technology, etc. Applied by the MC-FastPack Power-Tool.
- Ready to use 2-component epoxy-based anchor adhesive
- Suitable for dry and wet non-cracked concrete
- Applicable with threaded rods and rebars
- Rapid strength development for early initial loading
- High compressive and tensile strength
- Thixotropic and stable for vertical and overhead application
- Very low application temperature
- REACH exposure: water contact permanent, inhalation periodic, processing and application
- Environmental Product Declaration EPD
Applications
- Anchoring work for static and quasi-steady loads in horizontal, vertical and overhead areas
- Approved system for use in uncracked concrete from C20/25 to C50/60
- Anchoring for dry and permanent wet interior and exterior components, with and without especially aggressive conditions
- Anchoring of threaded rods and rebars for fixings of attachements e.g. consoles, railings, storage racks, awnings, scaffolding, suspended ceiling, building technology, etc.
- Approved as bonded anchor according to European Technical Assessment (ETA-15/0506)
- Manual application with the MC-Fastpack Power-Tool
You must be logged in to post a review.
Reviews
There are no reviews yet.